Sunday, May 19th 2013, 6:02pm UTC+2

You are not logged in.

  • Login

Octave Set up question

Dear visitor, you are currently not logged in. Login or Register as a new user .

Electrocide

Beginner

  • "Electrocide" started this thread

Posts: 4

Location: US

  • Send private message

1

Sunday, October 18th 2009, 10:46pm

Octave Set up question

I have a TI1 Keyboard. How do I set up a specific section of keys to control different parts of a Multi path or Seq setup. (ie C1-C2 = Drums, C2-C3 = Lead synth). SImple question, just haven't found the answer in the manual yet. Any help would save me some more time. Thanks.

jhuettner

Support Jedi

Posts: 296

  • Send private message

2

Thursday, October 22nd 2009, 4:13am

Hello,
The only mode this is possible in is the TI's MULTIMODE, so it is not possible to do this in case you use the TI totally integrated with the TI Control PlugIn.
Once the MULTIMODE is activated you can change all settings in the MULTI EDIT menu (push SHIFT + EDIT on the TI to get into this mode). Here you can scroll through all the different settings with the PARAMETER buttons and you can switch from one PART to another with the PART buttons.
Some of the menu entries there are "low key" and "high key". These parameters basically limit the keyboard range you will hear the selected PART in. So here you need to limit the key range e.g. from C1 to B1 for one part, C2 to B2 on another and so forth. Since I suppose you want to be able to play the different parts on the keyboard at the same time, make sure all the PARTs are then set to the same Midi channel like Midi channel 1 or so.

Best wishes,
Jörg Hüttner

Electrocide

Beginner

  • "Electrocide" started this thread

Posts: 4

Location: US

  • Send private message

3

Sunday, October 25th 2009, 1:44am

Perfect. Thanks.

Similar threads