Access Music User Forum

Okay,

Empty Logic 9 project
Create an instrument track, insert TI VC 3 x Stereo
Find an arp patch and get a 4 bar loop or whatever going
create another instrument track with an arp patch from a different plugin (I was using Albino but it does it regardless of plugin on my system)
Sequence that the same as the TI

That should be enough to replicate it. When you hit play the TI will make a buzzing sound, a bit like the atomizer effect and it will play out of time (if it triggers at all) until it catches up. If you select the TI instrument track, it comes in straight away without fail which is very nice.

System specs are Mac Pro 2,1 12GB RAM, Snow Leopard on 80GB Intel SSD, 3 x 500GB WD HDD (2 in RAID 0 for Audio, 1 for backup)

If you need anymore info please give us a shout, dinners ready!!

Cheers.

reinstalled today!

no problems whatsoever .. except it says that win7 is not supported

firefox also works with the forum today .. everything is great !

thnx !

Quoted from "Marc"

Quoted from "Aj"

Empty Logic 9 project
Create an instrument track, insert TI VC 3 x Stereo
Find an arp patch and get a 4 bar loop or whatever going
create another instrument track with an arp patch from a different plugin (I was using Albino but it does it regardless of plugin on my system)
Sequence that the same as the TI

That should be enough to replicate it. When you hit play the TI will make a buzzing sound, a bit like the atomizer effect and it will play out of time (if it triggers at all) until it catches up. If you select the TI instrument track, it comes in straight away without fail which is very nice.

yes, you're right, there is a new problem. we'll look into it.

marc

Yey!!! I'm so glad you could reproduce it. It's not a new problem for me, it's been like for a very long time! Very pleased you are looking into though, great news.

Cheers.

ever thought about your hardware Matt? Did you use the same hardware back then as you used now? Maybe it has to do with a combination as not all hardware is identical i guess.

Quoted from "Marc"

Quoted from "Aj"

Yey!!! I'm so glad you could reproduce it. It's not a new problem for me, it's been like for a very long time! Very pleased you are looking into though, great news.

you know what puzzles me? in the last years, on trade shows, i always did some sort of "jam session on the fly" type of demo. usually i was using Virus Control and Stylus for the drums. through i cannot say that i'm arpeggiating everything, for those demos, i always make use of arpeggiators and i never ran into the problem. the last set of demos i've done was at remix hotel in miami and i certainly didn't run into this issue. can you remember when this started for you?

best, marc

Can't remember to be honest marc. Maybe it was when Logic 8 came out, can't be sure. Were you using Mac&Logic at these shows etc? I've contacted support about this for a long time now and we have been through everything and seen as my display has a slight fault it was recommended that the main board be checked if I sent it back to get that looked at and make sure it was not a fault with my TI. I can't afford that at the moment unfortunately so I'll have to live with it. Glad you could replicate though. Was it exactly as I described on your system? With regards to the display, I have found a fix, annoying but it seems to solve the problem when I'm using it. When it starts to go, a vertical line in the middle of my display dims slightly to begin with, but if I notice it and catch it in time, I go to config, hike the display contrast right up then right down and it seems to come back and stay back! If I miss it, I just reboot the TI and the line starts working again and will be fine for the session! Any way of hiking the voltage to the display up a bit from within the software? Might be all it needs! Anyway, sorry to stray, it was on my mind thats all.

Cheers,

Cool, I'll look forward to any future news on this!

Cheers.

just to say thanks